VERBATIM S08V1901 Boot Loader [Linux], version 1.0.9_5 Built by linux, 16:44:33, Jun 22 2009 Processor: SL3516c3 CPU Rate: 300000000 AHB Bus Clock:150MHz Ratio:2/1 MAC 1 Address: 00:18:97:00:74:C5 MAC 2 Address: 00:50:C2:2B:D0:02 inet addr: 192.168.0.200/255.255.255.0 Waiting for disk ready & detect ... 2 IDE controller(s)... 2 IDE controller(s)... 2 IDE controller(s)... 2 IDE controller(s)... Timeout! Hard disk initial failed!! ==> enter ^C to abort booting within 3 seconds ...... Load Kern image from 0x30020000 to 0x1600000 size 3145728 Load Ramdisk image from 0x30320000 to 0x800000 size 6291456 Uncompressing Linux................................................................................................................................. done, booting the kernel. Linux version 2.6.15 (root@sw-server) (gcc version 3.4.4) #69 Fri Jul 24 19:52:46 CST 2009 CPU: FA526id(wb) [66015261] revision 1 (ARMv4) Machine: GeminiA Ignoring unrecognised tag 0x00000000 Memory policy: ECC disabled, Data cache writeback CPU0: D VIVT write-back cache CPU0: I cache: 16384 bytes, associativity 2, 16 byte lines, 512 sets CPU0: D cache: 8192 bytes, associativity 2, 16 byte lines, 256 sets Built 1 zonelists Kernel command line: root=/dev/ram0 rw console=ttySL0,19200 initrd=0x00800000,16M ramdisk_size=16384 PID hash table entries: 512 (order: 9, 8192 bytes) Bus: 150MHz(2/1) sl2312 console setup : Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) Memory: 64MB = 64MB total Memory: 43708KB available (3144K code, 1409K data, 96K init) Mount-cache hash table entries: 512 *** Page_chain_cachep Init!*** CPU: Testing write buffer coherency: ok checking if image is initramfs...it isn't (no cpio magic); looks like an initrd Freeing initrd memory: 16384K NET: Registered protocol family 16 PCI: bus0: Fast back to back transfers disabled sl2312_pci_map_irq : slot = 0 pin = 1 SCSI subsystem initialized usbcore: registered new driver usbfs usbcore: registered new driver hub NetWinder Floating Point Emulator V0.97 (double precision) VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Installing knfsd (copyright (C) 1996 okir@monad.swb.de). NTFS driver 2.1.25 [Flags: R/O]. SGI XFS with ACLs, large block numbers, no debug enabled SGI XFS Quota Management subsystem Initializing Cryptographic API io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered Real Time Clock Driver v0.10 Gemini Gpio init Register Gemini Power control Power event by Unknow Source Storlink CIR Initialization Watchdog Timer Initialized Storm crypto Initialization ttySL0 at MMIO 0x42000000 (irq = 18) is a SL2312 RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize loop: loaded (max 8 devices) VSC-switch not found Storm Semiconductors,Inc. SL351x Giga Ethernet driver 0.1.7 built at Jul 24 2009 19:51:57 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ide 0: physical = 63000000, virtual = c4800000, irq = 4 ide0: MMIO-DMA , BIOS settings: hda:pio, hdb:pio ide 1: physical = 63400000, virtual = c4802000, irq = 5 ide1: MMIO-DMA , BIOS settings: hdc:pio, hdd:pio hda: no response (status = 0x80), resetting drive hda: no response (status = 0x80) SL2312 MTD Driver Init....... SL2312 CFI Flash: Found 1 x16 devices at 0x0 in 16-bit bank Amd/Fujitsu Extended Query Table at 0x0040 number of CFI chips: 1 cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness. Creating 7 MTD partitions on "SL2312 CFI Flash": 0x00000000-0x00020000 : "RedBoot" 0x00020000-0x00320000 : "Kernel" 0x00320000-0x00920000 : "Ramdisk" 0x00920000-0x00f20000 : "Application" 0x00f20000-0x00f40000 : "VCTL" 0x00f40000-0x00fe0000 : "CurConf" 0x00fe0000-0x01000000 : "FIS directory" SL2312 MTD Driver Init Success ...... FTC_FOTG2XX : Init FOTG2XX Driver Init FOTG2xx driver FTC_FOTG2XX : >>> Found FOTG2XX ... pFTC_OTG c1756120 FTC_FOTG2XX_1 : Init FOTG2XX Driver Init FOTG2xx driver FTC_FOTG2XX_1 : >>> Found FOTG2XX ... pFTC_OTG_1 c17561e0 hcd->self.controller c17a5000 hcd end hcd_buffer_create ehci-hcd-FOTG2XX ehci-hcd-FOTG2XX: new USB bus registered, assigned bus number 1 usb_register_bus ghcd_FOTG2XX hcd c17a5000 hcd_irq_For_OTG ehci->caps->length 10, hcd->regs f6800000 , ehci->regs f6800010 udev->state 1 drivers/usb/host/ehci-hcd-FOTG2XX.c: USB support enabled, EHCI rev 101. 0 Timing on EOF1(0xf6800040) = 0xd hub 1-0:1.0: USB hub found hub 1-0:1.0: 1 port detected FTC_FOTG2XX : >>> +FOTG2XX_get_otg_transceiver FTC_FOTG2XX : registered host c17a5000 OTG2XX act as HOST only (don't need to wait gadget driver) +(OTGC_Init) pFTC_OTG->otg.default_a=1 +(OTGC_Init) pFTC_OTG->otg.default_a=1 OTG_enable_VBUS FTC_FOTG2XX : >>> Drive VBUS ok... +OTGP_Close() OTG2XX act as HOST only (remove gadget function) +OTGH_Open()(0x30=0x0) OTG_enable_VBUS mdwOTGC_Control_A_VBUS_VLD_Rd 80000 +OTGP_Close() OTG2XX act as HOST only (remove gadget function) +OTGH_Open()(0x30=0x0) ehci otg_set_host status 0 connect_change 1 clear_bit return set_bit hcd->self.controller c0566c00 hcd end hcd_buffer_create ehci-hcd-FOTG2XX-1 ehci-hcd-FOTG2XX-1: new USB bus registered, assigned bus number 2 usb_register_bus ghcd_FOTG2XX_1 hcd c0566c00 hcd_irq_For_OTG_1 ehci->caps->length 10, hcd->regs f6900000 , ehci->regs f6900010 udev->state 1 drivers/usb/host/ehci-hcd-FOTG2XX-1.c: USB support enabled, EHCI rev 101. 0 Timing on EOF1(0xf6900040) = 0xd hub 2-0:1.0: USB hub found hub 2-0:1.0: 1 port detected FTC_FOTG2XX_1 : >>> +FOTG2XX_get_otg_transceiver_1 FTC_FOTG2XX_1 : registered host c0566c00 OTG2XX act as HOST only (don't need to wait gadget driver) +(OTGC_Init_1) pFTC_OTG_1->otg.default_a=1 +(OTGC_Init_1) pFTC_OTG_1->otg.default_a=1 OTG_enable_VBUS FTC_FOTG2XX_1 : >>> Drive VBUS ok... +OTGP_Close_1() OTG2XX act as HOST only (remove gadget function) +OTGH_Open_1()(0x30=0x0) OTG_enable_VBUS mdwOTGC_Control_A_VBUS_VLD_Rd 80000 +OTGP_Close_1() OTG2XX act as HOST only (remove gadget function) +OTGH_Open_1()(0x30=0x0) ehci otg_set_host status 0 connect_change 1 clear_bit return set_bit usbcore: registered new driver usblp drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver Initializing USB Mass Storage driver... usbcore: registered new driver usb-storage USB Mass Storage support registered. ipsec_init : cryptographic accelerator ipsec tx_desc = ffc15000 ipsec rx_desc = ffc16000 ipsec tx_desc_dma = 01680000 ipsec rx_desc_dma = 01681000 NET: Registered protocol family 2 IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 4096 (order: 2, 16384 bytes) TCP bind hash table entries: 4096 (order: 2, 16384 bytes) TCP: Hash tables configured (established 4096 bind 4096) TCP reno registered TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 17 RAMDISK: Compressed image found at block 0 VFS: Mounted root (ext2 filesystem). Freeing init memory: 96K Mounting proc filesystem... 2.6.15 Mounting tmpfs to copy file from flash... 2.6.15 HardDiskBootUp=NO Boot up from flash Checking and Mounting filesystem(s) ... Copy hddapp.bz2 from flash to Ramdisk... 12288+0 records in 12288+0 records out insmod /lib/modules/fuse.ko Using /lib/modules/fuse.ko fuse init (API version 7.8) fuse distribution version: 2.6.3 2.6.15 2.6.15 2.6.15 SkinnyNAS found, mount /system mount: Mounting /dev/md0 on /system failed: No such device or address SkinnyNAS found, mount /system mount: Mounting /dev/hda1 on /system failed: No such device or address SkinnyNAS found, mount /system mount: Mounting /dev/hdb1 on /system failed: No such device or address SkinnyNAS found, mount /system mount: Mounting /dev/hdc1 on /system failed: No such device or address SkinnyNAS found, mount /system mount: Mounting /dev/hdd1 on /system failed: No such device or address SkinnyNAS found, mount /system mount: Mounting /dev/sda1 on /system failed: No such device or address SkinnyNAS found, mount /system mount: Mounting /dev/sdb1 on /system failed: No such device or address SkinnyNAS found, mount /system mount: Mounting /dev/sdc1 on /system failed: No such device or address SkinnyNAS found, mount /system mount: Mounting /dev/sdd1 on /system failed: No such device or address mounted device= 2.6.15 Umount tmpfs... GMAC-0 Addr 1 Vendor ID: 0x001cc912 mii_write: phy_addr=0x1 reg_addr=0x4 value=0x5e1 mii_write: phy_addr=0x1 reg_addr=0x9 value=0x300 IC PLUS or RealTek Phy select . mii_write: phy_addr=0x1 reg_addr=0x0 value=0x9200 mii_write: phy_addr=0x1 reg_addr=0x0 value=0x1200 Link Down (0x7949) MII REG 10 = 0x0 MII REG 5 (bit 5:15) = 0x0 Flow Control Disable. Storlink eth0 address = 0018970074C5 Disable MAC Flow Control... 2.6.15 Using /lib/modules/rt2561ap.ko rt2561ap: module license 'unspecified' taints kernel. Starting syslogd... Starting inetd... Starting crond... Mon Jan 1 12:00:00 GMT 2007 Running constructor /usr/sausalito/constructor/00_construct_start Running constructor /usr/sausalito/constructor/01_construct_network Running constructor /usr/sausalito/constructor/02_construct_autoip Running constructor /usr/sausalito/constructor/09_construct_time Running constructor /usr/sausalito/constructor/10_construct_dhcp Running constructor /usr/sausalito/constructor/12_construct_syslog Running constructor /usr/sausalito/constructor/20_construct_disk Running constructor /usr/sausalito/constructor/20_construct_sata_disk Running constructor /usr/sausalito/constructor/20_construct_usb_disk Running constructor /usr/sausalito/constructor/21_construct_disk_crypt Running constructor /usr/sausalito/constructor/25_construct_admin Running constructor /usr/sausalito/constructor/26_construct_grp_passwd Running constructor /usr/sausalito/constructor/27_construct_group Running constructor /usr/sausalito/constructor/30_construct_guest Running constructor /usr/sausalito/constructor/50_construct_telnet Running constructor /usr/sausalito/constructor/90_construct_errorNotification Running constructor /usr/sausalito/constructor/91_construct_bonjour Running constructor /usr/sausalito/constructor/95_construct_upnp Running constructor /usr/sausalito/constructor/98_construct_media Running constructor /usr/sausalito/constructor/99_construct_stop Done power ioctl successly Local package initialization:start syslogd syslogd: Already running. start crond start thttpd GetUDN: rand=4e26ac92 GetInterfaceName: ethernet interface name=eth0 GetUDN: UDN=4e26ac92-L121-7607-70aa-01897074c5 GetInterfaceName: ethernet interface name=eth0 ifname=eth0 GetIPaddr: IP address=169.254.181.59 main: HTTP_buf=http://169.254.181.59:80 . Mon Jan 1 12:00:25 GMT 2007 verbatimnas login: admin Password: admin warning: cannot change to home directory BusyBox v1.00-rc3 (2009.07.24-11:52+0000) Built-in shell (ash) Enter 'help' for a list of built-in commands. verbatimnas> cd /proc/ verbatimnas> cat cpuinfo Processor : FA526id(wb) rev 1 (v4l) BogoMIPS : 230.19 Features : swp half CPU implementer : 0x66 CPU architecture: 4 CPU variant : 0x0 CPU part : 0x526 CPU revision : 1 Cache type : write-back Cache clean : cp15 c7 ops Cache lockdown : format B Cache format : Harvard I size : 16384 I assoc : 2 I line length : 16 I sets : 512 D size : 8192 D assoc : 2 D line length : 16 D sets : 256 Hardware : GeminiA Revision : 0000 Serial : 0000000000000000 verbatimnas> cat mtd dev: size erasesize name mtd0: 00020000 00020000 "RedBoot" mtd1: 00300000 00020000 "Kernel" mtd2: 00600000 00020000 "Ramdisk" mtd3: 00600000 00020000 "Application" mtd4: 00020000 00020000 "VCTL" mtd5: 000a0000 00020000 "CurConf" mtd6: 00020000 00020000 "FIS directory" verbatimnas> cat iomem 00000000-03ffffff : System RAM 00020000-003322fb : Kernel text 00334000-0049464b : Kernel data 42000000-4200004f : serial_sl2312 63000000-63000040 : lepus-sata0 63400000-63400040 : lepus-sata 68000000-68000fff : ehci-hcd-FOTG2XX 68000000-68000fff : ehci-hcd-FOTG2XX 69000000-69000fff : ehci-hcd-FOTG2XX-1 69000000-69000fff : ehci-hcd-FOTG2XX-1 f4800000-f4800038 : irq_handler verbatimnas> cd /etc verbatimnas> cat ImageInfo_1.0.1_update\ verbatim\ icon UpgradeImages="zImage rd.gz hddapp.tgz" productName="Verbatim Network Attached Storage" hardwareName="Verbatim S08V1901" productVendor="Verbatim Corproation" VendorID="verbatim" ProductID="v1901" UpgradeVersion="263" ExtraVersion="n" manufacturerURL="http://www.verbatim.com" Description="Verbatim VerbatimNAS" hostname="verbatimnas" softwareVersion="1.0.0" TSS="enabled" DIRECT_MODE="disabled" Raid_Support="raid0_raid1_raid5_linear" RaidTestDiskSize="0" Raid_Show_Disk="6" DEFAULT_LAN_IPADDR="192.168.1.1" DEFAULT_LAN_NETMASK="255.255.255.0" DEFAULT_LAN_BOOTPROTO="dhcp" DEFAULT_WAN_BOOTPROTO="none" DEFAULT_WAN_ENABLED="no" DEFAULT_WLAN_DEVICENAME="ra0" DEFAULT_LAN_DEVICENAME="eth0" DEFAULT_HW_LAN_DEVICENAME="eth0" DEFAULT_WAN_DEVICENAME="eth1" DEFAULT_HW_WAN_DEVICENAME="eth1" SUPPORT_FILESYSTEM="ext2_ext3_fat32" SUPPORT_ENCRYPT_FILESYSTEM="ext2" DEFAULT_DHCP_ENABLED="0" SUPPORT_CODEPAGE="CP437_CP950_CP936_CP1145_CP1250_CP1252_CP932_CP949" DEFAULT_SERVER_CODEPAGE="CP437" FACTORY_RESET_ADMIN="0" DEFAULT_TIME_ZONE="Eastern" verbatimnas> ifconfig eth0 Link encap:Ethernet HWaddr 00:18:97:00:74:C5 inet addr:169.254.181.59 Bcast:169.254.255.255 Mask:255.255.0.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:116 errors:0 dropped:326 overruns:0 frame:0 TX packets:566 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:256 RX bytes:44737 (43.6 KiB) TX bytes:183376 (179.0 KiB) Interrupt:1 Base address:0xa000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:48 errors:0 dropped:0 overruns:0 frame:0 TX packets:48 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:3120 (3.0 KiB) TX bytes:3120 (3.0 KiB)